SUS Variable Lead Corner Radius End Mill For Stainless
Additional files
SUS-4EN-D10.pdfProduct Introduction
- “Variable –Lead” ute design leads stable and higher e cient performance.
- With the high helix angle groove is special designed for side milling which leads chip out is fast and improve tool life time due to not easy to generate heat on it.
- Special multilayer coating for milling all types 304 and 4 digit number stainless work piece.
| Number | (D) | (H) | (R) | (T) | (d) | (L) | Number | (D) | (H) | (R) | (T) | (d) | (L) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SUS0302R | 3 | 8 | 0.2R | 4 | 4 | 50 | SUS1005R | 10 | 25 | 0.5R | 4 | 10 | 75 | |
| SUS0305R | 3 | 8 | 0.5R | 4 | 4 | 50 | SUS1010R | 10 | 25 | 1R | 4 | 10 | 75 | |
| SUS0405R | 4 | 10 | 0.5R | 4 | 4 | 50 | SUS1020R | 10 | 25 | 2R | 4 | 10 | 75 | |
| SUS0410R | 4 | 10 | 1R | 4 | 4 | 50 | SUS1205R | 12 | 30 | 0.5R | 4 | 12 | 75 | |
| SUS0505R | 5 | 12.5 | 0.5R | 4 | 6 | 50 | SUS1210R | 12 | 30 | 1R | 4 | 12 | 75 | |
| SUS0510R | 5 | 12.5 | 1R | 4 | 6 | 50 | SUS1220R | 12 | 30 | 2R | 4 | 12 | 75 | |
| SUS0605R | 6 | 15 | 0.5R | 4 | 6 | 50 | SUS1605R | 16 | 45 | 0.5R | 4 | 16 | 100 | |
| SUS0610R | 6 | 15 | 1R | 4 | 6 | 50 | SUS1610R | 16 | 45 | 1R | 4 | 16 | 100 | |
| SUS0620R | 8 | 20 | 2R | 4 | 8 | 60 | SUS1620R | 16 | 45 | 2R | 4 | 16 | 100 | |
| SUS0805R | 8 | 20 | 0.5R | 4 | 8 | 60 | SUS2010R | 20 | 50 | 1R | 4 | 20 | 100 | |
| SUS0810R | 8 | 20 | 1R | 4 | 8 | 60 | SUS2020R | 20 | 50 | 2R | 4 | 20 | 100 | |
| SUS0820R | 8 | 20 | 2R | 4 | 8 | 60 |